Month: August 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

Phenyl 1 ,2-benzisoxazol-3-ylcarbamateA solution of 1 ,2-benzisoxazol-3-amine (1.00 g; CASNo. 36216-80-5) and triethylamine (1.09 ml_) in acetonitrile (5 ml_) was added dropwise to at 0 0C solution of phenyl chloroformate (0.989 ml_) in THF (20 ml_). The reaction was stirred at 0 0C for 1 h and then allowed to warm to RT overnight. The reaction was diluted with ethyl acetate and washed with 1 N HCI and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to RT, and filtered to give final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

As the paragraph descriping shows that 36216-80-5 is playing an increasingly important role.

Reference£º
Patent; PFIZER INC.; LONG, Scott Allen; MEYERS, Marvin Jay; PELC, Matthew James; SCHWEITZER, Barbara Ann; THORARENSEN, Atli; WANG, Lijuan Jane; WO2010/58318; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

Example 148: N-(benzo[d]isoxazol-3-yl)-2,4-dimethoxybenzenesulfonamide 148 A solution of 2,4-dimethoxybenzenesulfonyl chloride (0.18 g, 0.75 mmol) and benzo[d]isoxazol-3-amine (0.10 g, 0.75 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified twice by column chromatography (4 g Si02 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C then 4g Si02 cartridge, 0-35% EtOAc in petroleum benzine 40-60 C) to yield two batches (78 mg and 5 mg) of [183] the title compound (total mass 83 mg, 33 % yield) as white solids. 1H NMR (400 MHz, CDCI3) d 8.1 1 (d, J = 8.05 Hz, 1H), 7.79 (s, 1H), 7.70 (d, J = 8.81Hz, 1H), 7.57 – 7.50 (m, 1H), 7.47 – 7.40 (m, 1H), 7.37 – 7.29 (m, 1H), 6.50 (d, J = 2.27 Hz, 1H), 6.42 (dd, J = 2.25, 8.81Hz, 1H), 3.98 (s, 3H), 3.81 (s, 3H). LCMS-B: rt 3.20 min, m/z = 356.8 [M+Na]+, 334.8 [M+H]+.

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C).

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, 5-Chloro-3-phenylbenzo[c]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

719-64-2 5-Chloro-3-phenylbenzo[c]isoxazole 347291, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

89976-56-7, 5-Methylbenzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The crude 5-methyl-benzo[d]isoxazol-3-ylamine was dissolved in 60 mL CH2Cl2. To this solution was added di-tert-butyl-dicarbonate (14.6 g, 66.8 mmol) and a catalytic amount of DMAP. The reaction mixture was stirred at RT overnight. The mixture was concentrated in vacuo to about 30 mL volume, treated with hexanes and filtered to yield 4.8 g of N,N-di-Boc-5-methyl-benzo[d]isoxazol-3-ylamine as a solid.

The synthetic route of 89976-56-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bolin, David Robert; Hamilton, Matthew Michael; McDermott, Lee Apostle; Qian, Yimin; US2011/112158; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

651780-27-7 Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate 53401270, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

239097-74-6, Benzo[d]isoxazol-5-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a suspension of the ester compound from the procedure above (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of l,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated aHC03to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous a2S04, filtered andconcentrated to provide a residue. The residue was purified by prep-HPLC (MeCN/H20) to provide the title compound (40 mg, 38%) as a white solid.XH NMR (400 MHz, CDC13) delta 10.31 (s, 1H), 8.72-8.71 (m, 2H), 8.45 (d, J= 1.6 Hz, 1H), 7.67 (dd, J= 9.2 Hz, 2.0 Hz, 1H), 7.60 (d, J= 9.2 Hz, 1H), 6.79 (s, 1H), 2.84 (s, 3H), 2.74 (s, 3H). ES-MS m/z: 308.0 [M+H]+. HPLC Purity (214 nm): 98%; tR= 9.36 min.

As the paragraph descriping shows that 239097-74-6 is playing an increasingly important role.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse, Marie Josee; (139 pag.)WO2016/73895; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.851768-35-9,5-Amino-3-methylbenzo[d]isoxazole,as a common compound, the synthetic route is as follows.

Synthesis of N-(3-methyl-benzo[d]isozazol-5-yl)-4-propyl- benzenesulfonamide, STX875 (KRB01028) :; To a solution of 4n-propylbenzenesulphonyl chloride (124 mg, 0.567 mmol) in dichloromethane (3 rnL) was added pyridine (110 pL, 1.35 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (80 mg, 0.54 mmol) was added. The resulting mixture was stirred for 3 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a pale pink solid (150 mg, 84%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 119.5-120. 0C, HPLC purity 99+% (tR 2.29 min in 10% water-acetonitrile). 1H NMR (CDCI3) : No. 7.57 (2H, d, J=8.4 Hz), 7.40 (1H, d, J=2.2 Hz), 7.37 (1H, d, J=8.8 Hz), 7.20 (2H, d, J=8.4 Hz), 7.10 (1H, dd, J=8.8, 2.2 Hz), 6.71 (1H, s, N-/d), 2.59 (2H, t, J=7.5 Hz), 2.51 (3H, s), 1.59 (2H, sextet, J= 7.5 Hz), 0.88 (3H, t, J=7.5 Hz). LCMS: 314.07 (M- CH3). FAB-MS (MH+, Ci7HisN203S) : calcd 331.1116, found 331.1117

851768-35-9 5-Amino-3-methylbenzo[d]isoxazole 21345397, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C).

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,as a common compound, the synthetic route is as follows.

The preparation method is as follows: 5-chloro-3-phenyl 2,1-benzisoxazole (commercially available) (0.3 mmol, 68.7 mg), phenylacetaldehyde (0.6 mmol, 72.0 mg), copper powder (0.06) Methanol, 3.8 mg) and silver triflate (0.03 mmol, 8.0 mg) were added to a 25 ml Schlenk tube, and the reaction tube was replaced with oxygen three times under reduced pressure.Hexafluoroisopropanol (2 ml) was added and stirred at 110 C for 30 hours.After completion of the reaction, a column chromatography of silica gel of 100-200 mesh was added, and the solvent was evaporated under reduced pressure. The crude product was subjected to silica gel column chromatography, eluting with petroleum ether and ethyl acetate ( petroleum ether: ethyl acetate = 20:1) The liquid was eluted, and the elution was carried out by TLC elution. The eluate containing the desired product was collected, and the desired product eluent was combined and evaporated to give the quinoline compound of the formula i above, yield 69%. This material is a red solid.

The synthetic route of 719-64-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Jiangnan University; Zou Lianghua; Zhu Hao; Zhu Shuai; Li Pinggui; Yan Cheng; (12 pag.)CN110204486; (2019); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics