Day: September 29, 2020

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CHzClz (10 ml) was stirred at RT. 2-methylpropanoyl chloride (0.0025 mol) was added dropwise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated dry. The residue was further purified by column chromatography over silicagel (eluent: CH2Cl2) yielding 0.235 g of compound 8 and a fraction which was further purified using reversed phase HPLC chromatography on a Xterra MS C18 column (3. 5, um, 4.6 x 100 mm) with a flow rate of 1.6 m ./min (Elution conditions: three mobile phases (mobile phase A 95% 25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min. , to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 7 (Melting Point 130C).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37924-85-9

To a solution of the above crude 3-(bromomethyl)benzo[d]isoxazole (15.3 g) in CH3CN (100 mL) was added a solution of KCN (4 g, 61 mmol) in water (19 mL). The resulting solution was stirred overnight at 40C, and then quenched with water (200 mL) and extracted with ethyl acetate (4 x 200 mL). The combined organic layers were washed with brine (2 x 100 mL), dried over anhydrous sodium sulfate and concentrated in vacuo to afford a residue, which was purified by a silica gelcolumn chromatography eluting with 1 % – 2% ethyl acetate in petroleum ether to afford 2-(benzo[d]isoxazol-3-yl)acetonitrile as a yellow solid (1.15 g, 15 ). LC/MS (ES, m/z): [M+H]+ 159.0 *H NMR (300 MHz, DMSO) delta 7.87 – 7.84 (d, / = 8.10 Hz, 1H), 7.66 – 7.61 (m, 2H), 7.47 – 7.40 (m, 1H), 4.13 (s, 2H)

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,its application will become more common.

Reference£º
Patent; BIOENERGENIX; MCCALL, John; KELLY, Robert, C.; ROMERO, Donna, L.; WO2014/66795; (2014); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

(21). Iris{dibenzylideneacetoae)dipailadiuffi (123.6 mg, 0.14 mmol, 9.0 MO1%), XantPhos ( 104 mg, 0. 8 mmo’l. 12 moi%), ethyl 6-bromobenzo|d]isoxazole-3-carboxylate (608 mg, 2.25 mmol, 1.5 eq.),l- jX4 raemoxypheny1)me&yI}pyjrazofo^^(381 mg, 1.5 mmol, 1.0 eq.) and cesium carbonate (731 rag, 2.25 mmol. 1 ,5 eq.) were charged in a microwave vial. The vial was evacuated and purged with nitrogen (3X) and 1,4-dioxane (7.5 mL) was added. The reaction mixture was subjected to a microwave reactor tor 140 “C. After 2 h, the reaction mixture was cooled and filtered through a pad of Celite which was washed with EtOAc. Solvents were removed. Purification using reverse phase (Giison HPLC, acidic method (ACN water/0.1% TFA), gradient; 61-91%). Giison fractions were neutralized with sat solo. NaHC:::1.8, 8.8 H IH), 7.48 (dd, ./ – 4.3, 8.6 Hz, l H), 730 (d, J:::8.7 Hz, 2H), 6.88 (ddd, J – 2.9, 4.9, 8.7 Hz, 2H), 5.56 (s, 2H), 4.87 (q, 7.0 Hz, 2H), 3.70 (s, 3H), 1.41 (t, J = 3.2 Hz, 3H). ES-MS GammaMu+l f : 443.3.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; VANDERBILT UNIVERSITY; CONN, P. Jeffrey; HOPKINS, Corey R.; LINDSLEY, Craig W.; NISWENDER, Colleen M.; ENGERS, Darren W.; PANARESE, Joe; BOLLINGER, Sean; ENGERS, Julie; (157 pag.)WO2016/115282; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

EXAMPLE 12 3-[(4-pyridinyl)amino]-1,2-benzisoxazole A mixture of 3-amino-1,2-benzisoxazole (9.94 g, 74.18 mmole, prepared according to a method described in G. M. Shutske and K. J. Kapples, J. Heterocyclic Chem., 26, 1293 (1989)), 4-chloropyridine hydrochloride (22.27 g, 197 mmole) and 1-methyl-2-pyrolidinone was stirred vigorously at 130 C. for three hours. The reaction mixture was cooled, diluted with NaHCO3, and extracted with EtOAc, after which the organics were washed with water, dried (MgSO4), and concentrated. The residue was purified by flash chromatography (florisil, EtOAc), and then triturated with diethyl ether to yield 4.04 g (26%) of a fine brown solid. A 2.0 g portion was dissolved in boiling methanol and treated with charcoal (Darco) after which the product crystallized to yield 1.38 g of pale yellow crystals, mp 203 C. (dec.). ANALYSIS: Calculated for C12 H9 N3 O: 68.24% C; 4.29% H; 19.89% N; Found: 68.14% C; 4.12% H; 20.06% N.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Incorporated; US5328920; (1994); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

To prepare a-5, a-4 (2.1 g, 0.015 mol) was added to chlorosulfonic acid (4.1 ml, 0.060 mol) at room temperature (RT). Said reaction mixture was stirred overnight under an inert atmosphere such as nitrogen at 60C. The mixture was then poured in ice/water. The precipitate was filtered and dried with toluene in a Buchi-apparatus (2.1 g, yield 60%)., 36216-80-5

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

Reference£º
Patent; TIBOTEC PHARMACEUTICALS LTD; WO2003/97616; (2003); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

A mixture of ethyl 6-bromobenzoisoxazole-3-carboxylate (550 mg, 1.39 mmol), o- tolylboronic acid (377 mg, 1.5 [EQ),] Pd (PPh3) 4 (171 mg, 0.08 [EQ),] toluene (10 mL), ethanol (1.5 mL), and 1 M [NA2C03] (1.5 [ML)] is stirred at reflux for 3.5 h. The reaction mixture is diluted with [CHUCK] (0.1 L) and [H2O] (0.1 mL). The [CHZC12] solution is dried [(NA2S04),] filtered, and evaporated. The residue is purified by silica chromatography (heptane/EtOAc) to give Preparation [PA.’H] NMR (300 MHz, CDC) 8 8.14 (1H), 7.61 (2H), 7.42 (1H), 7.35-7. 2 (1H), 4.59 (2H), 2.28 (3H), 1.51 (3H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

(2) Bis(2,2,2-trichloroethyl) 1,2-benzisoxazol-3-ylimidodicarbonate; To a solution of 1,2-benzisoxazol-3-amine (4.00 g, 29.8 mmol) and pyridine (7.25 ml, 89.6 mmol) in tetrahydrofuran (100 ml) was added under ice-cooling, 2,2,2-trichloroethyl chloroformate (8.20 ml, 59.6 mmol), and the mixture was stirred under ice-cooling for 1 hour and at room temperature for 20 minutes. The reaction mixture was poured to water and extracted with ethyl acetate. The extract was washed with water and dried over anhydrous magnesium sulfate, and the solvent was distilled off under reduced pressure. To the residue was added hexane to give 13.3 g (91.7%) of the desired product as a solid. 1H-NMR (CDCl3) delta; 4.82 (4H, s), 7.36 – 7.44 (1H, m), 7.59 – 7.65 (3H, m).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1813606; (2007); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 16263-54-0,3,6-Dichlorobenzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 16263-54-0

3,6-dichlorobenzisoxazole (5.2 g, 27.8 mmol) and piperazine anhydride (24 g, 278 mmol) were placed in an eggplant type flask and reacted at 120 C. for 24 hours. After completion of the reaction, 52 ml of ice water was added to quench , Add 15 ml of 50% NaOH solution to the solution, stir for 5 minutes, extract with 30 ml * 3 dichloromethane, combine dichloromethane layer, wash with saturated brine 20 ml, dehydrate with anhydrous MgSO 4, evaporate to dryness, Isolated by alumina (200-300 mesh) column chromatography eluting with dichloromethane: methanol = 100: 1 to obtain 4.7 g of 6-chloro-3-piperazinyl-benzisoxazole, Yield is 71%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,16263-54-0,3,6-Dichlorobenzo[d]isoxazole,its application will become more common.

Reference£º
Patent; JIANGSU HENGYI PHARMACEUTICAL COMPANY LIMITED; SHANGHAI INSTITUTE OF PHARMACEUTICAL INDUSTRY; Li, JIANQI; PENG, SHAOPING; CAI, WANGPING; GAO, KAI; (39 pag.)JP5714152; (2015); B2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

Example 24; N-1,2-Benzisoxazol-3-yl-1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine-4-carboxamide; [Show Image] To a solution of 1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine-4-carboxylic acid (289 mg, 1.00 mmol) and N,N-dimethylformamide (0.010 ml) in tetrahydrofuran (5 ml) was added in water-bath, oxalyl chloride (0.174 ml, 2.00 mmol), and the mixture was stirred at room temperature for 1 hour. The solvent was distilled off under reduced pressure. The residue was added to a solution of 1,2-benzisoxazol-3-amine (134 mg, 1.00 mmol) in pyridine (0.404 ml, 5.00 mmol) under ice-cooling, followed by stirring at room temperature for 1 hour. The solvent was distilled off under reduced pressure. The residue was poured to water and extracted with ethyl acetate. The extract was washed with water and dried over anhydrous magnesium sulfate, and the solvent was distilled off under reduced pressure. The residue was purified by silica gel column chromatography (hexane : ethyl acetate = 1 : 1) to give the desired product as a solid. The resulting solid was recrystallized from a mixed solvent of hexane and ethyl acetate to give 60.3 mg (14.9%) of the desired product. 1H-NMR (CDCl3) delta; 2.05 – 2.22 (4H, m), 2.88 (1H, br s), 3.36 – 3.45 (2H, m), 4.11 – 4.18 (2H, m), 7.32 – 7.63 (6H, m), 8.19 – 8.27 (3H, m), 9.46 (1H, br s).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1813606; (2007); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics