Day: November 4, 2020

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.36216-80-5,A new synthetic method of this compound is introduced below.36216-80-5

36216-80-5, Example 149: N-(benzo[d]isoxazol-3-yl)-2,6-dimethoxybenzenesulfonamide 149 A solution of 2,6-dimethoxybenzene-1-sulfonyl chloride I111 (0.088 g, 0.37 mmol) and benzo[d]isoxazol-3-amine (0.050 g, 0.37 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours, then at 120 C for 2 hours. The reaction mixture was loaded onto silica and purified by column chromatography (12g Si02 cartridge, 0-35 % EtOAc in petroleum benzine 40-60 C) to give the title compound (3.9 mg, 3.1 % yield) as a white solid. NMR (400 MHz, CDCIs) d 8.30 (s, 1H), 8.17 (dt, J = 1.04, 8.15 Hz, 1H), 7.55 – 7.47 (m, 1H), 7.47 – 7.34 (m, 2H), 7.34 – 7.28 (m,1H), 6.60 (d, J = 8.52 Hz, 2H), 3.91 (s, 6H). LCMS-B: rt 3.13 min, m/z = 334.8[M+H]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9,A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(b) Sodium hydride (50% in mineral oil, 3.4 g, 0.071 mole) is washed free of mineral oil with hexane (3*30 mL) and suspended in dimethylformamide (100 mL). This suspension is well stirred and maintained near room temperature (water bath) during the dropwise addition of a solution of imidazole (4.8 g, 0.071 mole) in dimethylformamide (25 mL). The reaction mixture is stirred at room temperature for 1 hour when 3-bromomethyl-1,2-benzisoxazole (15.0 g, 0.071 mole) is added all at once. The mixture is then heated at 85 C. for 8 hours. The solvent is evaporated in vacuo and the residue is taken up in methylene chloride (200 mL) and washed with water (3*50 mL). The organic solution is dried over anhydrous sodium sulfate, filtered and evaporated to give 3-[(1H-imidazol-1-yl)methyl]-1,2-benzisoxazole, which is purified by recrystallisation from isopropanol, m.p. 52-55 C.

The chemical industry reduces the impact on the environment during synthesis, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 36216-80-5,36216-80-5

General procedure: To a stirred solution of pyridin-2-amine (1.0 g, 10.6 mmol) and pyridine (1.01 mL, 12.7 mmol) in THF (35 mL) was added 2,2,2- trichloroethyl chloroformate (1.76 mL, 12.7 mmol) dropwise at 0 C. The mixture was stirred at 0 C for 1.5 h, poured into water, and extracted with EtOAc. The organic layer was washed with water, dried over anhydrous MgSO4, and concentrated in vacuo. The residue was triturated with Et2O-hexane to give 36 (1.76 g, 62%) as a colorless powder.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 36216-80-5.

Reference£º
Article; Kono, Mitsunori; Matsumoto, Takahiro; Kawamura, Toru; Nishimura, Atsushi; Kiyota, Yoshihiro; Oki, Hideyuki; Miyazaki, Junichi; Igaki, Shigeru; Behnke, Craig A.; Shimojo, Masato; Kori, Masakuni; Bioorganic and Medicinal Chemistry; vol. 21; 1; (2013); p. 28 – 41;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5-Chloro-3-phenylbenzo[c]isoxazole,719-64-2, This compound has unique chemical properties. The synthetic route is as follows.

(3) According to a mass ratio of 30:2:0.08:1.7, methanol, 5-chloro-3-phenyl-2,1benzisoxazole, palladium-carbon catalyst, and ammonium formate were mixed and heated to reflux at 50C for 2 hours. After allowing to cool to room temperature, the mixture was filtered, and the resulting residue was vacuum dried at 50C for 4 hours to obtain 2-amino-5-chlorobenzophenone.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 719-64-2.

Reference£º
Patent; Shanxi Jujiehan Chemical Co., Ltd.; Li Changying; (5 pag.)CN107698453; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9 A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 37924-85-9 reaction routes.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.36216-80-5,A new synthetic method of this compound is introduced below.

Method BA A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration or DCM extraction (2×1 ml.) and purified using silica gel column chromatography (EtOAc/petroleum benzine 40-60 C gradient) or preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used as well as purification conditions.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 37924-85-9,37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

According to the analysis of related databases, 37924-85-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 239097-74-6,Benzo[d]isoxazol-5-amine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 239097-74-6,239097-74-6

Synthesis of N-benzofdlisoxazol-5-vl-2, 5-dichloro-benzenesulfonamide, STX 920 (KRB01048):; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (192 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 uL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (174 mg, 68%), single spot at Rf 0.68 (1: 1 hexane: ethyl acetate). mp 172.9- 173. 6C, HPLC purity 99+% (tR 2.41 min in 10% water-acetonitrile).’H NMR (CDCI3) : 5 8.64 (1H, s), 7.89 (1H, d, J=2.2 Hz), 7.56-7. 28 (5H, m). LCMS: 341.07 (M-). FAB-MS (MH+, C13H8Cl2N2O3S) : calcd 342.9711, found 342.9710., 239097-74-6

According to the analysis of related databases, 239097-74-6, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5,A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C)., 36216-80-5

The chemical industry reduces the impact on the environment during synthesis, 36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 28691-49-8,6-Chlorobenzo[d]isoxazole-3-carboxylic acid, as follows.28691-49-8

Example 54 (6-Chlorobenzo[d]isoxazol-3-yl)(2-methyl-3-phenyl-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)methanone To a solution of 6-chlorobenzo[d]isoxazole-3-carboxylic acid (52 mg, 0.263 mmol) in dichloromethane (600 muL) was added N,N-dimethylformamide (10 muL, 0.13 mmol, 0.948 g/mL) and oxalyl chloride (25 muL, 0.287 mmol, 1.45 g/mL) at 0 C. The reaction mixture was stirred at 0 C. for 5 min. To the reaction mixture was added 2-methyl-3-phenyl-4,5,6,7-tetrahydropyrazolo[3,4-c]pyridine, Intermediate 1 (55 mg, 0.258 mmol) at 0 C. The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The reaction mixture was diluted with water (2 mL) and extracted with ethyl acetate (2*5 mL). The combined organic layers were washed with 10% potassium bisulfate (1*5 mL), 1 M sodium carbonate (1*5 mL) and brine (1*5 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified by reverse phase HPLC to afford the title compound (14 mg, 0.036 mmol, 13%) as an off-white powder. MS (ESI): mass calcd. for C21H17ClN4O2, 392.1; m/z found, 393.1 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 8.15-8.12 (m, 1H), 7.96 (d, J=8.5 Hz, 1H), 7.58-7.42 (m, 6H), 4.86 (s, 2H), 3.88-3.83 (m, 2H), 3.79 (s, 3H), 2.67-2.60 (m, 2H)., 28691-49-8

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Chlorobenzo[d]isoxazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference£º
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics