Day: November 17, 2020

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5-Amino-3-methylbenzo[d]isoxazole, cas is 851768-35-9,the Benzisoxazole compound. 851768-35-9. Here is a downstream synthesis route of the compound 851768-35-9

Synthesis of 2, 5-dichloro-N- (3-methvl-benzofdlisozazol-5-vl)- benzenesulfonamide, STX 876 (KRB01030) :; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (105 mg, 0.428 mmol) in dichloromethane (3 mL) was added pyridine (100 pL, 1.02 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (60 mg, 0.41 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a yellow solid (100 mg, 68%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 229.4-230. 0C, HPLC purity 94% (tR 2.18 min in 10% water-acetonitrile).’H NMR (CDC13) : 6 7.89 (1H, d, J=2.2 Hz), 7.43 (4H, m), 7.22 (1H, m), 7.09 (1H, s, N-H), 2.54 (3H, s). LCMS: 340.06 (M-CH3). FAB-MS (MH+, C14H10CI2N203S) : calcd 356.9867, found 356.9860

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 851768-35-9

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 651780-27-7, name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, introduce a new downstream synthesis route as follows. 651780-27-7

To a mixture of ethyl 6-bromobenzisoxazole-3-carboxylate (2.0 g, 7.4 mmol) and t- butyl 5-cyanoanthranilate (1.62 g, 7.4 mmol) in toluene (27 [ML)] is added NaH (1.5 g of a 60% mineral oil dispersion, 3.8 mmol) under N2. The reaction mixture is stirred overnight at rt. This mixture is diluted with aq 1 N [HCI,] extracted with EtOAc (0.2 L). The EtOAc solution is dried and concentrated to give Preparation Pb as a solid : 1H NMR (300 MHz, CDC13) [8] 12.8 (1H), 9.05 [(1H),] 8.38 (1H), 8.18 (1H), 7.92 (1H), 7.82 (1H), 7.61 [(1H),] [1.] 69 [(9H).]

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 651780-27-7, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route., 36216-80-5

Example 24; N-1,2-Benzisoxazol-3-yl-1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine-4-carboxamide; [Show Image] To a solution of 1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine-4-carboxylic acid (289 mg, 1.00 mmol) and N,N-dimethylformamide (0.010 ml) in tetrahydrofuran (5 ml) was added in water-bath, oxalyl chloride (0.174 ml, 2.00 mmol), and the mixture was stirred at room temperature for 1 hour. The solvent was distilled off under reduced pressure. The residue was added to a solution of 1,2-benzisoxazol-3-amine (134 mg, 1.00 mmol) in pyridine (0.404 ml, 5.00 mmol) under ice-cooling, followed by stirring at room temperature for 1 hour. The solvent was distilled off under reduced pressure. The residue was poured to water and extracted with ethyl acetate. The extract was washed with water and dried over anhydrous magnesium sulfate, and the solvent was distilled off under reduced pressure. The residue was purified by silica gel column chromatography (hexane : ethyl acetate = 1 : 1) to give the desired product as a solid. The resulting solid was recrystallized from a mixed solvent of hexane and ethyl acetate to give 60.3 mg (14.9%) of the desired product. 1H-NMR (CDCl3) delta; 2.05 – 2.22 (4H, m), 2.88 (1H, br s), 3.36 – 3.45 (2H, m), 4.11 – 4.18 (2H, m), 7.32 – 7.63 (6H, m), 8.19 – 8.27 (3H, m), 9.46 (1H, br s).

The chemical industry reduces the impact on the environment during synthesis, 36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1813606; (2007); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound, below Introduce a new synthetic route., 651780-27-7

20a) Ethyl 6-(4-hydroxyphenyl)-l,2-benzisoxazole-3-carboxylateEthyl 6-bromo-l,2-benzisoxazole-3-carboxylate (0.34 g, 1.26 mmol), (4- hydroxyphenyl)boronic acid (0.21, 1.51 mmol), tetrakis(triphenylphosphine)palladium (0) (0.06 g, 0.05 mmol) and 2 M sodium carbonate (5 mL) in 1 ,2-dimethoxyethane (6 mL) were stirred at 80 0C for 1 hour. The reaction mixture was diluted with water, followed by ethyl acetate. The layers were separated and the ethyl acetate layer was washed with brine, dried over magnesium sulfate, filtered, and concentrated to afford the crude material. The crude material was purified using hexanes: ethyl acetate (0 to 40% ethyl acetate) to afford a mixture of desired product, plus the free acid of the desired product, 6-(4-hydroxyphenyl)-l,2- benzisoxazole-3-carboxylic acid. All the fractions were combined and concentrated. The mixture was then dissolved in ethanol. Thionyl chloride was added, and the reaction mixture was reflux for 8 days. The reaction mixture was cooled to room temperature and concentrated. The concentrated material was diluted with 5% sodium bicarbonate, and extracted with ethyl acetate. The ethyl acetate layer was washed with water followed by brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified using hexanes: ethyl acetate (0 to 100% ethyl acetate) to afford 0.044 g (13%) of ethyl 6-(4-hydroxyphenyl)- 1 ,2-benzisoxazole-3- carboxylate. 1H NMR (400 MHz, d6-DMSO): delta 9.76 (s, IH), 8.05 (m, 2H), 7.79 (dd, J = 8, 1 Hz, IH), 7.65 (d, J = 9 Hz, 2H), 6.88 (d, J = 9 Hz, 2H), 4.47 (q, J = 7 Hz, 2H), 1.39 (t, J = 7 Hz, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 651780-27-7, and friends who are interested can also refer to it.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157270; (2008); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route., 36216-80-5

A solution of 1 ,2-benzisoxazol-3-amine (1.00 g; CASNo. 36216-80-5) and triethylamine (1.09 mL) in acetonitrile (5 mL) was added dropwise to at 0 0C solution of phenyl chloroformate (0.989 mL) in THF (20 mL). The reaction was stirred at 0 0C for 1 h and then allowed to warm to room temp overnight. The reaction was diluted with ethyl acetate and washed with 1 N HCI and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to room temp, and filtered to give the final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 36216-80-5.

Reference£º
Patent; PFIZER INC.; WO2009/127948; (2009); A1;; ; Patent; PFIZER INC.; WO2009/127949; (2009); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 3,6-Dichlorobenzo[d]isoxazole, cas is 16263-54-0,the Benzisoxazole compound, below Introduce a new synthetic route., 16263-54-0

To a solution of benzimidazole-2-one (Aldrich, 1.1 g, 7.5 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (1.5 g, 7.5 mmol) and Cs2CO3 (4.8 g, 15 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and stirred in a ice bath for 2 hours. The mixture was then filtered. The solid was washed with water and dried under high vacuum to obtain 2.0 g (93%) of a yellow solid as l-(6-chlorobenzisoxazol-3-yl)benzimidazole-2-one. To a solution of the above product (1.0 g, 3.5 mmol) in DMF (15 ml) was added NaOMe solution in methanol (30% wt/wt, 10 ml). The mixture was heated to 8O0C under vacuum to remove residual methanol and then stirred at 11O0C under nitrogen overnight. The mixture was then cooled to room temperature, diluted with water (50 ml), adjusted to pH 6 with 10% aqueous HCl. The resulting suspension was stirred in an ice bath for 2 hours and filtered. The solid was washed with water and dried in an oven (900C) for 2 hours and then under high vacuum at room temperature for 3 hours to obtain a slightly yellow solid. LC-MS m/e: (M+ 1) = 282, 16263-54-0

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 16263-54-0, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

239097-74-6, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-5-amine, cas is 239097-74-6,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 239097-74-6

Synthesis of N-benzofdlisoxazol-5-vl-2, 5-dichloro-benzenesulfonamide, STX 920 (KRB01048):; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (192 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 uL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (174 mg, 68%), single spot at Rf 0.68 (1: 1 hexane: ethyl acetate). mp 172.9- 173. 6C, HPLC purity 99+% (tR 2.41 min in 10% water-acetonitrile).’H NMR (CDCI3) : 5 8.64 (1H, s), 7.89 (1H, d, J=2.2 Hz), 7.56-7. 28 (5H, m). LCMS: 341.07 (M-). FAB-MS (MH+, C13H8Cl2N2O3S) : calcd 342.9711, found 342.9710., 239097-74-6

According to the analysis of related databases, 239097-74-6, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5-Methylbenzo[d]isoxazol-3-amine, cas is 89976-56-7,the Benzisoxazole compound. 89976-56-7. Here is a downstream synthesis route of the compound 89976-56-7

Benzoic isoxazol-3-bis(N,N-t-butoxycarbonyl)amine (122): To a solution of 121 (148 mg, 1 mmol) in DCM (2 mL) was added di-t-butyldicarbonate (546 mg, 2.5 mmol), DIEA (0.348 mL, 2 mmol), and DMAP (22.2 mg, 1 mmol) at O0C. The reaction was warmed up to RT and stirred for 4 hr and then diluted with ethyl acetate and treated with aqueous ammonium chloride to pH 6. The organic layer was separated and washed with brine and concentrated in vacuo. The residue purified by silica gel chromatography using 100% hexane as the eluent to yield 122 (347 mg, 100%), LC-MS (ESI) m/z 348.8.

89976-56-7. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.89976-56-7, if you are interested, you can browse my other articles.

Reference£º
Patent; DAIAMED, INC.; WO2006/108039; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route.

Under nitrogen benzo [d] isoxazol-3-amine (3.6g, 26.8mmol) was dissolved in chlorosulfonic acid (15.0mL), heated to 60 stirred overnight.Cooled to room temperature, ice water (20 mL), suction filtered, the filter cake was dried at 60 deg.] C under vacuum to give a white solid (5.0g, 87%)., 36216-80-5

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 36216-80-5, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Guangdong East sunshine Pharmaceutical Co; Zuo, Yinglin; Zheng, Jinfu; Wen, Liang; Zhang, Min; Wu, Shoutao; Yuan, Xiaofeng; Lin, Runfeng; Wang, Xiaojun; Zhang, Yingjun; (27 pag.)CN104530046; (2016); B;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 36216-80-5, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. A new synthetic method of this compound is introduced below.

Example 4: (R)-l-(Benzo[rf]isoxazol-3-yIcarbamoylmethyl)-3-(l-phenyl- cycloheptanecarbonyloxy)-l-azonia-bicyclo[2.2.2]octane bromide To a mixture of benzo[36216-80-5, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 36216-80-5, you can also browse my other articles.

Reference£º
Patent; ASTRAZENECA AB; ARGENTA DISCOVERY LIMITED; WO2009/138707; (2009); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics