Day: May 18, 2021

Name is Benzo[d]isoxazol-3-amine, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 36216-80-5, its synthesis route is as follows.

Example 149: N-(benzo[d]isoxazol-3-yl)-2,6-dimethoxybenzenesulfonamide 149 A solution of 2,6-dimethoxybenzene-1-sulfonyl chloride I111 (0.088 g, 0.37 mmol) and benzo[d]isoxazol-3-amine (0.050 g, 0.37 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours, then at 120 C for 2 hours. The reaction mixture was loaded onto silica and purified by column chromatography (12g Si02 cartridge, 0-35 % EtOAc in petroleum benzine 40-60 C) to give the title compound (3.9 mg, 3.1 % yield) as a white solid. NMR (400 MHz, CDCIs) d 8.30 (s, 1H), 8.17 (dt, J = 1.04, 8.15 Hz, 1H), 7.55 – 7.47 (m, 1H), 7.47 – 7.34 (m, 2H), 7.34 – 7.28 (m,1H), 6.60 (d, J = 8.52 Hz, 2H), 3.91 (s, 6H). LCMS-B: rt 3.13 min, m/z = 334.8[M+H]+.

36216-80-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,36216-80-5 ,Benzo[d]isoxazol-3-amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C).

The chemical industry reduces the impact on the environment during synthesis,36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 651780-27-7, its synthesis route is as follows.

20a) Ethyl 6-(4-hydroxyphenyl)-l,2-benzisoxazole-3-carboxylateEthyl 6-bromo-l,2-benzisoxazole-3-carboxylate (0.34 g, 1.26 mmol), (4- hydroxyphenyl)boronic acid (0.21, 1.51 mmol), tetrakis(triphenylphosphine)palladium (0) (0.06 g, 0.05 mmol) and 2 M sodium carbonate (5 mL) in 1 ,2-dimethoxyethane (6 mL) were stirred at 80 0C for 1 hour. The reaction mixture was diluted with water, followed by ethyl acetate. The layers were separated and the ethyl acetate layer was washed with brine, dried over magnesium sulfate, filtered, and concentrated to afford the crude material. The crude material was purified using hexanes: ethyl acetate (0 to 40% ethyl acetate) to afford a mixture of desired product, plus the free acid of the desired product, 6-(4-hydroxyphenyl)-l,2- benzisoxazole-3-carboxylic acid. All the fractions were combined and concentrated. The mixture was then dissolved in ethanol. Thionyl chloride was added, and the reaction mixture was reflux for 8 days. The reaction mixture was cooled to room temperature and concentrated. The concentrated material was diluted with 5% sodium bicarbonate, and extracted with ethyl acetate. The ethyl acetate layer was washed with water followed by brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified using hexanes: ethyl acetate (0 to 100% ethyl acetate) to afford 0.044 g (13%) of ethyl 6-(4-hydroxyphenyl)- 1 ,2-benzisoxazole-3- carboxylate. 1H NMR (400 MHz, d6-DMSO): delta 9.76 (s, IH), 8.05 (m, 2H), 7.79 (dd, J = 8, 1 Hz, IH), 7.65 (d, J = 9 Hz, 2H), 6.88 (d, J = 9 Hz, 2H), 4.47 (q, J = 7 Hz, 2H), 1.39 (t, J = 7 Hz, 3H).

651780-27-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,651780-27-7 ,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157270; (2008); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

The chemical industry reduces the impact on the environment during synthesis,719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 651780-27-7, its synthesis route is as follows.

Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

651780-27-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,651780-27-7 ,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-(Bromomethyl)benzo[d]isoxazole, 37924-85-9

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Benzo[d]isoxazol-3-amine, 36216-80-5

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

Phenyl 1 ,2-benzisoxazol-3-ylcarbamateA solution of 1 ,2-benzisoxazol-3-amine (1.00 g; CASNo. 36216-80-5) and triethylamine (1.09 ml_) in acetonitrile (5 ml_) was added dropwise to at 0 0C solution of phenyl chloroformate (0.989 ml_) in THF (20 ml_). The reaction was stirred at 0 0C for 1 h and then allowed to warm to RT overnight. The reaction was diluted with ethyl acetate and washed with 1 N HCI and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to RT, and filtered to give final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

The chemical industry reduces the impact on the environment during synthesis,36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; PFIZER INC.; LONG, Scott Allen; MEYERS, Marvin Jay; PELC, Matthew James; SCHWEITZER, Barbara Ann; THORARENSEN, Atli; WANG, Lijuan Jane; WO2010/58318; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is Benzo[d]isoxazol-3-amine, and cas is 36216-80-5, its synthesis route is as follows.

a) N-Benzo[d]isoxazol-3-yl-2-chloro-acetamide To a mixture of benzo[d]isoxazol-3-ylamine (1 g) and cesium carbonate (2.42 g) in dry DMF (20 mL), stirred at rt, was added bromoacetyl chloride (0.62 mL) by dropwise addition. After stirring the mixture for 8 hours, the reaction was poured into water (100 mL) and the products extracted into ether (2*200 mL). The combined extracts were dried over magnesium sulfate and concentrated to dryness. The crude product was purified on silica gel using ether/isohexane (4/6) to afford the sub-titled compound as a colourless solid (0.5 g). m/e 210 [M+H]+

36216-80-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,36216-80-5 ,Benzo[d]isoxazol-3-amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Bull, Richard James; Skidmore, Elizabeth Anne; Ford, Rhonan Lee; Mather, Andrew Nigel; Mete, Antonio; US2011/172237; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is Benzo[d]isoxazol-6-amine, and cas is 828300-70-5, its synthesis route is as follows.

A quantity of 0.13 g (1 mmole) OF BENZO [d] isoxazol-6-ylamine is treated with 0.27 g (1 mmole) of 6, 8-Dibromo-imidazo [1, 2-a] pyrazine in acetonitrile with 3 eq. OF K2C03 AT REFLUX for 16 hrs. The reaction mixture is cooled partitioned between ethyl acetate and water, the organic extracts are dried over anhydrous MGSO4 and evaporated in vacuo to afford Benzo [d] ISOXAZOL-6-YL- (6-BROMO- imidazo [1, 2-A] PYRAZIN-8-YL)-AMINE

828300-70-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,828300-70-5 ,Benzo[d]isoxazol-6-amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; CELLULAR GENOMICS, INC.; WO2005/5429; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics