Category: 2879-20-1

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO277,mainly used in chemical industry, its synthesis route is as follows.,2879-20-1

General procedure: A 10 mL glass flask equipped with a magnetic stir bar wascharged with a methyl ketone (1 mmol) and dissolved in MeCN (2 mL). To thethermostated solution NH4NO3 (10-25 mol %), I2 (50 mol %) and H2SO4(aqueous 96% solution, 10-20 mol %) were added and the flask was furtherequipped with a balloon filled with air (1 L) and magnetically stirred at 60 C.The consumption of starting material was monitored by TLC. After completionof the reaction, the mixture was cooled to room temperature, diluted withEtOAc (10 mL), and insoluble material identified as ammonium sulfate wasfiltered off. The filtrate neutralized with NaHCO3 (aqueous 10% solution, 2 mL)and Na2S2O3 (aqueous 10% solution, 2 mL) and phase was separated. The waterphase was washed with EtOAc additionally two times (2 5 mL). The combinedorganic phase was dried over anhydrous Na2SO4 and the solvent distilled underreduced pressure. The crude product obtained was analyzed by 1H NMR. Finallythe crude product was purified using column chromatography (SiO2, n-hexane/CH2Cl2 elution) and preparative thin layer chromatography to afford purematerial, which was compared to authentic samples. Detailed data, concerningcatalyst loading, reaction times, yields of pure products and their spectroscopicand other identification data are given in SI in the chapter Characterization dataof isolated final products. Characterization, for example, 1-(9H-fluoren-2-yl)-2-iodoethanone (2i): 1-(9H-Fluoren-2-yl)ethanone (1 mmol, 208.3 mg), NH4NO3(0.15 mmol, 12 mg), I2 (0.50 mmol, 126.7 mg), H2SO4 (aqueous 96% solution,0.10 mmol, 5.56 lL), 2 mL MeCN, balloon filled with 1 L of air, 60 C, 20 h were used; crystallization from acetone; yield: 187.2 mg (55%) yellow solid, mp 163-164 C. 1H NMR (303 MHz, CDCl3+two drops of DMSO, 25 C, TMS): d (ppm) 3.92 (s,2H), 4.41 (s, 2H), 7.32-7.44 (m, 2H), 7.54-7.59 (m, 1H), 7.77-7.84 (m, 2H), 7.96-8.02(m, 1H), 8.13 (s, 1H); 13C NMR (76.2MHz, CDCl3+two drops of DMSO, 25 C): d(ppm) 2.3, 36.6, 119.6, 120.7, 125.0, 125.3, 126.9, 128.1, 128.1, 131.5, 139.9, 143.2,144.3, 146.8, 192.4;MS (ESI):m/z 335 ((M+H)+, 100%);HR-MS (ESI):m/z = 334.9925,calcd for C15H12IO: 334.9933; Anal. calcd for C15H11IO: C, 53.92; H, 3.32; found: C,54.39; H, 3.05. 3-(2-Iodoacetyl)-2H-chromen-2-one (2o): 3-Acetyl-2H-chromen-2-one (1 mmol, 188.2mg), NH4NO3 (0.20 mmol, 16 mg), I2 (0.50 mmol, 126.7mg),H2SO4 (aqueous 96% solution, 0.1 mmol, 5.56 lL), 2mLMeCN, balloon filledwith 1 Lof air, 60 C, 23 h were used; column chromatography (SiO2, CH2Cl2); yield:182.2mg (58%), yellow solid; mp 135-138 C. 1H NMR (303.0 MHz, CDCl3, 25C,TMS): d (ppm) 4.68 (s, 2H), 7.34-7.46 (m, 2H), 7.64-7.76 (m, 2H), 8.66 (s, 1H); 13CNMR (76.2MHz, CDCl3, 25 C): d (ppm) 6.8, 116.7, 118.1, 121.4, 125.1, 130.2, 134.9,149.5, 155.3, 158.6, 190.1; MS (ESI): m/z 314.9 ((M+H)+, 100%); HR-MS (ESI): m/z = 314.9523, calcd for C11H8IO3: 314.9518.

With the synthetic route has been constantly updated, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,belong benzodioxans compound

Reference£º
Article; Prebil, Rok; Stavber, Stojan; Tetrahedron Letters; vol. 55; 41; (2014); p. 5643 – 5647;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belong benzodioxans compound,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,2879-20-1,Molecular formula: C10H10O3,mainly used in chemical industry, its synthesis route is as follows.,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

With the synthetic route has been constantly updated, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,belong benzodioxans compound

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

2879-20-1 is used more and more widely, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

A mixture of Intermediate 5 (210 mg, 1.04 mmol) and 6-acetyl-l,4-benzodioxane (CAS: 2879-20-1; 223 mg, 1.25 mmol) in Ti^Pr^ (3.1 mL, 10.4 mmol) were stirred at 75 C under N2 atmosphere for 4 h. The reaction mixture was cooled to 0 C under N2 atmosphere and 1 ,2-dichloroethane (1 mL), MeOH (15 mL) and sodium boro hydride (1 18 mg, 3.13 mmol) were sequentially added. The reaction mixture was allowed to warm to rt and further stirred at rt for 3 h. Water and DCM were added. The mixture was filtered through a celite pad and the volatiles were evaporated in vacuo. The residue thus obtained was taken up in DCM and HCl (lmL, 4N in 1,4-dioxane) was added. The volatiles were evaporated in vacuo and the resulting residue was treated with Et20 to give a solid that was filtered and dried to yield product 33 as hydrochloric acid salt (29 mg, 7% yield).

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; BARTOLOME-NEBREDA, Jose, Manuel; TRABANCO-SUAREZ, Andres, Avelino; MARTINEZ VITURRO, Carlos, Manuel; TRESADERN, Gary, John; ALCAZAR-VACA, Manuel, Jesus; (126 pag.)WO2018/109198; (2018); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

2879-20-1, General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

With the rapid development of chemical substances, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem