Category: 37924-85-9

One of the major reasons is to use measurements of the macroscopic properties of a system, 37924-85-9, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound, introduce a new downstream synthesis route.

General procedure: To NaOMe (25% soln, 0.5 mL, 2.2 mmol) in MeOH (5 mL) was added thiosemicarbazide 9 (200 mg, 2.2 mmol). Diethyloxalate (0.3 mL, 2.2 mmol) was then added dropwise. The mixture was heated at 65 C for 2 h and then cooled to rt. 1-(Bromomethyl)-4-chlorobenzene (500 mg, 2.4 mmol) was added in one portion; stirring was continued at rt for 3 h and then heated overnight at 50 C. The reaction mixture was concentrated. The residue was dissolved in EtOAc (40 mL), washed with water (20 mL), and brine (20 mL). The organic phase was dried over Na2SO4, concentrated and purified by silica gel column chromatography (EtOAc w/ 0.2% HOAc). The product was triturated in Et2O to afford 59 mg of 6g as a light yellow solid (10% yield)

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 37924-85-9

Reference£º
Article; Hin, Niyada; Duvall, Bridget; Berry, James F.; Ferraris, Dana V.; Rais, Rana; Alt, Jesse; Rojas, Camilo; Slusher, Barbara S.; Tsukamoto, Takashi; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2088 – 2091;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound. 37924-85-9. Here is a downstream synthesis route of the compound 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.Step 1: To a 0C solution of -4:1 mixture of tert-butyl (S)-1-((S)-1-(benzo[djisoxazol-3- ylmethyl)-2-oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1,41 diazepin-3 -ylamino)- 1 -oxopropan-2- yl(methyl)carbamate and tert-butyl (S)-i -((S)-i -(benzo[dlisoxazol-3-ylmethyl)-4-oxo-2,3 ,4,5- tetrahydro- 1 H-benzo [bI [1 ,4ldiazepin-3-ylamino)- 1 -oxopropan-2-yl(methyl)carbamate (209.4 mg, 424 tmol) in CH2C12 (4.24 mL) was added pyridine (343 tL, 4.24 mmol), followed by methyl 4-(chlorocarbonyl)benzoate (92.7 mg, 467 tmol). After 1 h at 0 C the mixture was diluted with H20 and extracted with CH2C12. The combined extracts were washed with 1 N aq. citric acid, sat. aq. NaHCO3, and brine, dried over Na2504, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide methyl 4-((S)-5-(benzo[djisoxazol-3 -ylmethyl)-3 -((S)-2-(tert-butoxycarbonyl(methyl)amino) propanamido)-4-oxo-2,3 ,4,5 -tetrahydro- 1 Hbenzo[b l[1,4ldiazepine-1-carbonyl)benzoate (194 mg, 70 %) as a white solid. LC-MS mlz 678 [M+Naj .

37924-85-9. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.37924-85-9, if you are interested, you can browse my other articles.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound. An updated downstream synthesis route of 37924-85-9 as follows. 37924-85-9

(b) A solution containing 1-dimethylcarbamoyl-4-(3-trimethylsilyloxypropyl)-imidazole (6.7 g, 0.025 mole), and 3-bromomethyl-1,2-benzisoxazole (5.3 g, 0.025 mole) in anhydrous acetonitrile (30 mL) is stirred at reflux for 72 hours. The reaction mixture is cooled and mixed with a solution of sodium methoxide (3 g, 0.055 mole) in methanol (30 mL). The resulting solution is stirred at reflux for 26 hours. The solvents are evaporated and the residue is taken up in 1N hydrochloric acid (30 mL). This solution is allowed to stand at ambient temperature for 3 hours and is then made basic (pH 9) by addition of 50% aqueous sodium hydroxide solution. The mixture is extracted with methylene chloride (2*25 mL) and the combined extracts are washed with water (2*20 mL), dried over anhydrous sodium sulfate, filtered, and the solvent is evaporated to give crude 3-[(5-(3-hydroxypropyl)-1H-imidazol-1-yl)methyl]-1,2-benzisoxazole which is purified by trituration with acetone (15 mL), m.p. 129-131 C.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 37924-85-9, if you are interested., 37924-85-9

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 37924-85-9, name is 3-(Bromomethyl)benzo[d]isoxazole, introduce a new downstream synthesis route as follows.

To a solution of the above crude 3-(bromomethyl)benzo[d]isoxazole (15.3 g) in CH3CN (100 mL) was added a solution of KCN (4 g, 61 mmol) in water (19 mL). The resulting solution was stirred overnight at 40C, and then quenched with water (200 mL) and extracted with ethyl acetate (4 x 200 mL). The combined organic layers were washed with brine (2 x 100 mL), dried over anhydrous sodium sulfate and concentrated in vacuo to afford a residue, which was purified by a silica gelcolumn chromatography eluting with 1 % – 2% ethyl acetate in petroleum ether to afford 2-(benzo[d]isoxazol-3-yl)acetonitrile as a yellow solid (1.15 g, 15 ). LC/MS (ES, m/z): [M+H]+ 159.0 *H NMR (300 MHz, DMSO) delta 7.87 – 7.84 (d, / = 8.10 Hz, 1H), 7.66 – 7.61 (m, 2H), 7.47 – 7.40 (m, 1H), 4.13 (s, 2H)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 37924-85-9.

Reference£º
Patent; BIOENERGENIX; MCCALL, John; KELLY, Robert, C.; ROMERO, Donna, L.; WO2014/66795; (2014); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 37924-85-9

(b) Sodium hydride (50% in mineral oil, 3.4 g, 0.071 mole) is washed free of mineral oil with hexane (3*30 mL) and suspended in dimethylformamide (100 mL). This suspension is well stirred and maintained near room temperature (water bath) during the dropwise addition of a solution of imidazole (4.8 g, 0.071 mole) in dimethylformamide (25 mL). The reaction mixture is stirred at room temperature for 1 hour when 3-bromomethyl-1,2-benzisoxazole (15.0 g, 0.071 mole) is added all at once. The mixture is then heated at 85 C. for 8 hours. The solvent is evaporated in vacuo and the residue is taken up in methylene chloride (200 mL) and washed with water (3*50 mL). The organic solution is dried over anhydrous sodium sulfate, filtered and evaporated to give 3-[(1H-imidazol-1-yl)methyl]-1,2-benzisoxazole, which is purified by recrystallisation from isopropanol, m.p. 52-55 C.

37924-85-9. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.37924-85-9, if you are interested, you can browse my other articles.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3-(Bromomethyl)benzo[d]isoxazole,37924-85-9, This compound has unique chemical properties. The synthetic route is as follows.,37924-85-9

(b) Sodium hydride (50% in mineral oil, 3.4 g, 0.071 mole) is washed free of mineral oil with hexane (3*30 mL) and suspended in dimethylformamide (100 mL). This suspension is well stirred and maintained near room temperature (water bath) during the dropwise addition of a solution of imidazole (4.8 g, 0.071 mole) in dimethylformamide (25 mL). The reaction mixture is stirred at room temperature for 1 hour when 3-bromomethyl-1,2-benzisoxazole (15.0 g, 0.071 mole) is added all at once. The mixture is then heated at 85 C. for 8 hours. The solvent is evaporated in vacuo and the residue is taken up in methylene chloride (200 mL) and washed with water (3*50 mL). The organic solution is dried over anhydrous sodium sulfate, filtered and evaporated to give 3-[(1H-imidazol-1-yl)methyl]-1,2-benzisoxazole, which is purified by recrystallisation from isopropanol, m.p. 52-55 C.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 37924-85-9.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, as follows.37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.Step 1: To a 0C solution of -4:1 mixture of tert-butyl (S)-1-((S)-1-(benzo[djisoxazol-3- ylmethyl)-2-oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1,41 diazepin-3 -ylamino)- 1 -oxopropan-2- yl(methyl)carbamate and tert-butyl (S)-i -((S)-i -(benzo[dlisoxazol-3-ylmethyl)-4-oxo-2,3 ,4,5- tetrahydro- 1 H-benzo [bI [1 ,4ldiazepin-3-ylamino)- 1 -oxopropan-2-yl(methyl)carbamate (209.4 mg, 424 tmol) in CH2C12 (4.24 mL) was added pyridine (343 tL, 4.24 mmol), followed by methyl 4-(chlorocarbonyl)benzoate (92.7 mg, 467 tmol). After 1 h at 0 C the mixture was diluted with H20 and extracted with CH2C12. The combined extracts were washed with 1 N aq. citric acid, sat. aq. NaHCO3, and brine, dried over Na2504, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide methyl 4-((S)-5-(benzo[djisoxazol-3 -ylmethyl)-3 -((S)-2-(tert-butoxycarbonyl(methyl)amino) propanamido)-4-oxo-2,3 ,4,5 -tetrahydro- 1 Hbenzo[b l[1,4ldiazepine-1-carbonyl)benzoate (194 mg, 70 %) as a white solid. LC-MS mlz 678 [M+Naj .

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 37924-85-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9,A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(b) A solution containing 1-dimethylcarbamoyl-4-(3-trimethylsilyloxypropyl)-imidazole (6.7 g, 0.025 mole), and 3-bromomethyl-1,2-benzisoxazole (5.3 g, 0.025 mole) in anhydrous acetonitrile (30 mL) is stirred at reflux for 72 hours. The reaction mixture is cooled and mixed with a solution of sodium methoxide (3 g, 0.055 mole) in methanol (30 mL). The resulting solution is stirred at reflux for 26 hours. The solvents are evaporated and the residue is taken up in 1N hydrochloric acid (30 mL). This solution is allowed to stand at ambient temperature for 3 hours and is then made basic (pH 9) by addition of 50% aqueous sodium hydroxide solution. The mixture is extracted with methylene chloride (2*25 mL) and the combined extracts are washed with water (2*20 mL), dried over anhydrous sodium sulfate, filtered, and the solvent is evaporated to give crude 3-[(5-(3-hydroxypropyl)-1H-imidazol-1-yl)methyl]-1,2-benzisoxazole which is purified by trituration with acetone (15 mL), m.p. 129-131 C.

The chemical industry reduces the impact on the environment during synthesis, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9 A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 37924-85-9 reaction routes.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3-(Bromomethyl)benzo[d]isoxazole,37924-85-9, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 18A mixture of 18a (20 mg, 0.060 mmol), 18b (12.7 mg, 0.060 mmol), and potassium carbonate (24.8 mg, 0.18 mmol) in DMF (1 ml) was heated at 50 C for 2h. The reaction solution was purified on RP-HPLC using 10-100% acetonitrile (0.05%TFA) to give 18 as the TFA salt.’HNMR (acetonitrile-d3, 500 MHz) delta = 8.047-8.031 (dd, J = 8.1Hz, IH), 7.738-7.723 (m, 2H), 7.503-7.452 (m, IH), 7.448 (s, IH), 7.399-7.321 (m, 5H), 7.067-7.052 (dd, J – 7.5Hz, IH), 6.173 (s, IH), 4.755 (s, 2H), 3.736-3.701(m, 2H), 3.550-3.450 (m, 2H), 2.800-2.745 (m5 IH), 2.4Gamma3- 2.404 (m, IH), 2.141-2.1 10 (m, IH), 2.036-2.001 (m IH); m z: calcd. for C26H22Cl2N202:465.37; found [M+H+]: 465.00; 466.94.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 37924-85-9.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; DING, FA-Xiang; JIANG, Jinlong; SHEN, Dong-Ming; SHEN, Hong; SHI, Zhi-Cai; WO2011/137024; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics