Downstream synthetic route of 16263-54-0

As the paragraph descriping shows that 16263-54-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16263-54-0,3,6-Dichlorobenzo[d]isoxazole,as a common compound, the synthetic route is as follows.

To a solution of l-Boc-5-trifluoromethoxybenzimidazole-2-one (5 g, 15.7 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (3.0 g, 15.7 mmol) and Cs2CO3 (11 g, 31.4 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and extracted with ethyl acetate (2×20 ml). The organic extracts were combined, dried over anhydrous Mg2SO4, and concentrated to dryness. The residue was purified by silica gel column chromatography using hexane/ethyl acetate (4:1) as solvent system. Fractions containing earlier eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-5- trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.54 (d, J=8.5, IH), 7.14 (d, J=8.5, IH), 7.13 (s, IH). Fractions containing later eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-6-trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.66 (brs, IH), 7.54 (d, J=8.5, IH), 7.13 (brs, IH).

As the paragraph descriping shows that 16263-54-0 is playing an increasingly important role.

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Brief introduction of 37924-85-9

The synthetic route of 37924-85-9 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,as a common compound, the synthetic route is as follows.

EXAMPLE 18A mixture of 18a (20 mg, 0.060 mmol), 18b (12.7 mg, 0.060 mmol), and potassium carbonate (24.8 mg, 0.18 mmol) in DMF (1 ml) was heated at 50 C for 2h. The reaction solution was purified on RP-HPLC using 10-100% acetonitrile (0.05%TFA) to give 18 as the TFA salt.’HNMR (acetonitrile-d3, 500 MHz) delta = 8.047-8.031 (dd, J = 8.1Hz, IH), 7.738-7.723 (m, 2H), 7.503-7.452 (m, IH), 7.448 (s, IH), 7.399-7.321 (m, 5H), 7.067-7.052 (dd, J – 7.5Hz, IH), 6.173 (s, IH), 4.755 (s, 2H), 3.736-3.701(m, 2H), 3.550-3.450 (m, 2H), 2.800-2.745 (m5 IH), 2.4Gamma3- 2.404 (m, IH), 2.141-2.1 10 (m, IH), 2.036-2.001 (m IH); m z: calcd. for C26H22Cl2N202:465.37; found [M+H+]: 465.00; 466.94.

The synthetic route of 37924-85-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; DING, FA-Xiang; JIANG, Jinlong; SHEN, Dong-Ming; SHEN, Hong; SHI, Zhi-Cai; WO2011/137024; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

New learning discoveries about 851768-35-9

As the paragraph descriping shows that 851768-35-9 is playing an increasingly important role.

851768-35-9, 5-Amino-3-methylbenzo[d]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Synthesis of 3-chloro-2-methyl-N-(3-methyl-benzo[d]isoxazol-5-yl)- benzenesulfonamide, STX 874 (KRB01027):; To a solution of 3-chloro-2-methylbenzenesulphonyl chloride (128 mg, 0.567 mmol) in dichloromethane (3 mL) was added pyridine (110 muL, 1.35 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole [26] (80 mg, 0.54 mmol) was added. The resulting mixture was stirred for 4 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (88 mg, 48%), single spot at Rf 0.58 (1: 1 hexane: ethyl acetate). mp 162.8-163. 2C, HPLC purity 99+% (tR 2.26 min in 10% water- acetonitrile).’H NMR (CDC13) : 6 7.80 (1H, dd, J=7.9, 1.3 Hz), 7.55 (1H, dd, J=8. 1, 1.1 Hz), 7.38 (2H, m), 7.17 (1 H, t, J=8.1 Hz), 7.10 (1H, dd, J=8.8, 2.2 Hz), 6.72 (1H, s, N-lez 2.72 (3H, s), 2.50 (3H, s). LCMS: 320.00 (M-CH3). FAB-MS (MH+, C15H13ClN2O3S) : calcd 337.0413, found 337.0422.

As the paragraph descriping shows that 851768-35-9 is playing an increasingly important role.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Brief introduction of 28691-49-8

The synthetic route of 28691-49-8 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.28691-49-8,6-Chlorobenzo[d]isoxazole-3-carboxylic acid,as a common compound, the synthetic route is as follows.

Example 54 (6-Chlorobenzo[d]isoxazol-3-yl)(2-methyl-3-phenyl-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)methanone To a solution of 6-chlorobenzo[d]isoxazole-3-carboxylic acid (52 mg, 0.263 mmol) in dichloromethane (600 muL) was added N,N-dimethylformamide (10 muL, 0.13 mmol, 0.948 g/mL) and oxalyl chloride (25 muL, 0.287 mmol, 1.45 g/mL) at 0 C. The reaction mixture was stirred at 0 C. for 5 min. To the reaction mixture was added 2-methyl-3-phenyl-4,5,6,7-tetrahydropyrazolo[3,4-c]pyridine, Intermediate 1 (55 mg, 0.258 mmol) at 0 C. The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The reaction mixture was diluted with water (2 mL) and extracted with ethyl acetate (2*5 mL). The combined organic layers were washed with 10% potassium bisulfate (1*5 mL), 1 M sodium carbonate (1*5 mL) and brine (1*5 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified by reverse phase HPLC to afford the title compound (14 mg, 0.036 mmol, 13%) as an off-white powder. MS (ESI): mass calcd. for C21H17ClN4O2, 392.1; m/z found, 393.1 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 8.15-8.12 (m, 1H), 7.96 (d, J=8.5 Hz, 1H), 7.58-7.42 (m, 6H), 4.86 (s, 2H), 3.88-3.83 (m, 2H), 3.79 (s, 3H), 2.67-2.60 (m, 2H).

The synthetic route of 28691-49-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Analyzing the synthesis route of 36216-80-5

The synthetic route of 36216-80-5 has been constantly updated, and we look forward to future research findings.

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CH2C12 (10 ml) was stirred at RT. Phenylacetylchloride (0.0025 mol) was added drop wise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was crystallized in isopropanol. Yielding 0.210 g compound 5 (yield of 84%), melting point 164C.

The synthetic route of 36216-80-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Simple exploration of 719-64-2

719-64-2 5-Chloro-3-phenylbenzo[c]isoxazole 347291, aBenzisoxazole compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,as a common compound, the synthetic route is as follows.

(3) 5-Chloro-3-phenyl-2,1 benzisoxazole,Iron powder,The concentration of 95% ethanol,Heat reflux at 35C for 30 minutes,Then, ethanol was added dropwise to the system.among them,The volume ratio of hydrochloric acid to ethanol is 1:5.After refluxing, reflux at 35C for 2 hours.Sodium hydroxide solution was added dropwise to adjust the pH of the system to 7,Add activated carbon to the systemContinue refluxing for 20 minutes,filter,The filter residue is vacuum dried at 50C for 4 hours.among them,5-chloro-3-phenyl-2,1benzoxazole,Iron powder,95% ethanol,Ethanol solution of hydrochloric acid,The mass ratio of activated carbon is 2:1.2:15:2:0.2,That is, 2-amino-5-chlorobenzophenone is obtained.

719-64-2 5-Chloro-3-phenylbenzo[c]isoxazole 347291, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; Shanxi Jujiehan Chemical Co., Ltd.; Li Changying; (5 pag.)CN107698454; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Analyzing the synthesis route of 37924-85-9

The synthetic route of 37924-85-9 has been constantly updated, and we look forward to future research findings.

37924-85-9, 3-(Bromomethyl)benzo[d]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

3-Bromomethyl-benzo[d]isoxazole-5-sulfonyl chloride Chlorosulfonic acid (1.5 ml, 22 mmol) was slowly added to 3-Bromomethyl-benzo[d]isoxazole (1.0 g, 4.7 mmol) at RT under argon. The reaction was heated at 90 C. for 12 h and then left at RT for 6 h. The resulting viscous oil was quenched over ice, extracted with EtOAc, dried over MgSO4 and concentrated in vacuo to a brown oil (1.17 g, 80% yield).; 3-Bromomethyl-benzo[d]isoxazole-5-sulfonyl chloride Chlorosulfonic acid (1.5 ml, 22 mmol) was slowly added to 3-Bromomethyl-benzo[d]isoxazole (1.0 g, 4.7 mmol) at RT under argon. The reaction was heated at 90 C. for 12 h and then left at RT for 6 h. The resulting viscous oil was quenched over ice, extracted with EtOAc, dried over MgSO4 and concentrated in vacuo to a brown oil (1.17 g, 80% yield). After reaction of this material with the core the aliphatic bromine may be displaced by an appropriate nucleophile.

The synthetic route of 37924-85-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Sequoia Pharmaceuticals; US2005/267074; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Downstream synthetic route of 36216-80-5

As the paragraph descriping shows that 36216-80-5 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

To a solution of triethylamine (0. 0025 mol) in CH2Cl2 (5 ml) benzoylchloride (0.0025 mol) was added. The mixture stirred at RT and intermediate 3 (0.0025 mol) in CH2C12 (5 ml) added dropwise. The reaction mixture was stirred overnight at RT. The mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was purified by column chromatography over silicagel (eluent CH2Cl2) yielding O. OlOg compound 9 (yield of 2%, Melting Point 133C) and a fraction which was further purified by column chromatography over silicagel (eluent hexane/CH2Cl2) yielding 0.225 g of compound 10 (yield of 38%, Melting Point 97C-100C), and 0.100 g of compound 11 (yield of 17%, Melting Point 154C-160C).

As the paragraph descriping shows that 36216-80-5 is playing an increasingly important role.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Brief introduction of 16263-54-0

The synthetic route of 16263-54-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16263-54-0,3,6-Dichlorobenzo[d]isoxazole,as a common compound, the synthetic route is as follows.

3,6-dichlorobenzisoxazole (5.2 g, 27.8 mmol) and piperazine anhydride (24 g, 278 mmol) were placed in an eggplant type flask and reacted at 120 C. for 24 hours. After completion of the reaction, 52 ml of ice water was added to quench , Add 15 ml of 50% NaOH solution to the solution, stir for 5 minutes, extract with 30 ml * 3 dichloromethane, combine dichloromethane layer, wash with saturated brine 20 ml, dehydrate with anhydrous MgSO 4, evaporate to dryness, Isolated by alumina (200-300 mesh) column chromatography eluting with dichloromethane: methanol = 100: 1 to obtain 4.7 g of 6-chloro-3-piperazinyl-benzisoxazole, Yield is 71%.

The synthetic route of 16263-54-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; JIANGSU HENGYI PHARMACEUTICAL COMPANY LIMITED; SHANGHAI INSTITUTE OF PHARMACEUTICAL INDUSTRY; Li, JIANQI; PENG, SHAOPING; CAI, WANGPING; GAO, KAI; (39 pag.)JP5714152; (2015); B2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Simple exploration of 651780-27-7

651780-27-7 Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate 53401270, aBenzisoxazole compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

To a solution of ethyl ^- fomo-l ,2-benzoxazole-3-caioxyiate (540.16 rag, 2 mmol, J .0 eq.) in THF ( iO mL) at -78 “C was added a solution of methyltnagncsiuja bromide in diethyl ether (3M, 3.33 HiL 10 mmol, 5.0 eq..). The resulting mixture was stirred at -78 C for 3 h. Sat. solo NH CI was added. The mixture was warmed to rt and extracted with EiOAc (3x). The combined extracts were washed with brine, dried over ajSO*, filtered and concentrated, under reduced pressure. The crude material was purified using normal phase flash chromatography on silica gel (0-50% EtOAc/hexanes) to provide die title compound (410 mg? 85.4% yield) as a white powder. H- MR (400 MHz, DMSO~<}: S 8.33 (s, IH), 8.06 (d, J=- 8.4 Hz, IH), 7,71 (dd, ,/ - 8.5, 1 A Hz, H), 2.73 (s 3H). 651780-27-7 Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate 53401270, aBenzisoxazole compound, is more and more widely used in various. Reference£º
Patent; VANDERBILT UNIVERSITY; CONN, P. Jeffrey; HOPKINS, Corey R.; LINDSLEY, Craig W.; NISWENDER, Colleen M.; ENGERS, Darren W.; PANARESE, Joe; BOLLINGER, Sean; ENGERS, Julie; (157 pag.)WO2016/115282; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics