Category: Benzisoxazole

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CHzClz (10 ml) was stirred at RT. 2-methylpropanoyl chloride (0.0025 mol) was added dropwise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated dry. The residue was further purified by column chromatography over silicagel (eluent: CH2Cl2) yielding 0.235 g of compound 8 and a fraction which was further purified using reversed phase HPLC chromatography on a Xterra MS C18 column (3. 5, um, 4.6 x 100 mm) with a flow rate of 1.6 m ./min (Elution conditions: three mobile phases (mobile phase A 95% 25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min. , to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 7 (Melting Point 130C).

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, 5-Chloro-3-phenylbenzo[c]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A, in a reaction vessel equipped with a stirrer, a reflux condenser, 5-chloro-3-phenyl-benzisoxazole 0.26 mol, the mass fraction of 30% 2-bromo-5-fluoronitrobenzene solution 390ml, nickel chloride powder 0.46 mol, control the stirring speed at 190 rpm, raise the solution temperature to 78 C, reflux reaction 120 min; B, adding 90% of 4-chlorophenethylamine solution with a mass fraction of 21% slowly add the ethylene glycol dimethyl ether solution with a mass fraction of 37% adding time to control at 110min, continue to reflux reaction 5h. C, add the mass fraction of 27% sodium bicarbonate solution 200ml, reduce the solution temperature to 16 C, molecular sieve bleaching, filtration, the filtrate was concentrated, again lowering the solution temperature to 5 C, the mass fraction of 70% triethylamine solution washing, calcium oxide dehydrating agent dehydration, to give crystals of 2-amino-5-chlorobenzophenone 55.59 g, yield 92%.

719-64-2 5-Chloro-3-phenylbenzo[c]isoxazole 347291, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; Chengdu Qiesite Technology Co., Ltd.; Peng Fei; (9 pag.)CN106083621; (2016); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used.

The synthetic route of 36216-80-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 7 N-[2-(4-Morpholinyl)ethyl]-1,2-benzisoxazol-3-amine To a solution of 3-amino-1,2-benzisoxazole (3.5 g) in N,N-dimethylformamide (DMF) (100 ml) was added sodium hydride (0.8 g) under nitrogen. The reaction was stirred one hour at ambient temperature. A solution of 4-(2-chloroethyl)morpholine (4.0 g) in DMF (50 ml) was added followed by heating to 120 C. for one hour. TLC (5% MeOH/DCM) analysis revealed the absence of starting material. The reaction was quenched with water and extracted with EtOAc. The organic layer was washed with water, dried (MgSO4), and concentrated in vacuo. Flash column chromatography (silica gel) eluding with 1.5-2.5% MeOH/DCM afforded the product (2.5 g), m.p. 79-80 C. ANALYSIS: Calculated for C13 H17 N3 O2: 63.14%C 6.93%H 16.99%N Found: 63.47%C 6.87%H 16.95%N

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; Hoechst-Roussel Pharmaceutical Incorporated; US5494908; (1996); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.89976-56-7,5-Methylbenzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

Benzoic isoxazol-3-bis(N,N-t-butoxycarbonyl)amine (122): To a solution of 121 (148 mg, 1 mmol) in DCM (2 mL) was added di-t-butyldicarbonate (546 mg, 2.5 mmol), DIEA (0.348 mL, 2 mmol), and DMAP (22.2 mg, 1 mmol) at O0C. The reaction was warmed up to RT and stirred for 4 hr and then diluted with ethyl acetate and treated with aqueous ammonium chloride to pH 6. The organic layer was separated and washed with brine and concentrated in vacuo. The residue purified by silica gel chromatography using 100% hexane as the eluent to yield 122 (347 mg, 100%), LC-MS (ESI) m/z 348.8.

The synthetic route of 89976-56-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; DAIAMED, INC.; WO2006/108039; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, 3-(Bromomethyl)benzo[d]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

As the paragraph descriping shows that 37924-85-9 is playing an increasingly important role.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

Phenyl 1 ,2-benzisoxazol-3-ylcarbamateA solution of 1 ,2-benzisoxazol-3-amine (1.00 g; CASNo. 36216-80-5) and triethylamine (1.09 ml_) in acetonitrile (5 ml_) was added dropwise to at 0 0C solution of phenyl chloroformate (0.989 ml_) in THF (20 ml_). The reaction was stirred at 0 0C for 1 h and then allowed to warm to RT overnight. The reaction was diluted with ethyl acetate and washed with 1 N HCI and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to RT, and filtered to give final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

As the paragraph descriping shows that 36216-80-5 is playing an increasingly important role.

Reference£º
Patent; PFIZER INC.; LONG, Scott Allen; MEYERS, Marvin Jay; PELC, Matthew James; SCHWEITZER, Barbara Ann; THORARENSEN, Atli; WANG, Lijuan Jane; WO2010/58318; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

Example 148: N-(benzo[d]isoxazol-3-yl)-2,4-dimethoxybenzenesulfonamide 148 A solution of 2,4-dimethoxybenzenesulfonyl chloride (0.18 g, 0.75 mmol) and benzo[d]isoxazol-3-amine (0.10 g, 0.75 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified twice by column chromatography (4 g Si02 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C then 4g Si02 cartridge, 0-35% EtOAc in petroleum benzine 40-60 C) to yield two batches (78 mg and 5 mg) of [183] the title compound (total mass 83 mg, 33 % yield) as white solids. 1H NMR (400 MHz, CDCI3) d 8.1 1 (d, J = 8.05 Hz, 1H), 7.79 (s, 1H), 7.70 (d, J = 8.81Hz, 1H), 7.57 – 7.50 (m, 1H), 7.47 – 7.40 (m, 1H), 7.37 – 7.29 (m, 1H), 6.50 (d, J = 2.27 Hz, 1H), 6.42 (dd, J = 2.25, 8.81Hz, 1H), 3.98 (s, 3H), 3.81 (s, 3H). LCMS-B: rt 3.20 min, m/z = 356.8 [M+Na]+, 334.8 [M+H]+.

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, 5-Chloro-3-phenylbenzo[c]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

719-64-2 5-Chloro-3-phenylbenzo[c]isoxazole 347291, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C).

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics