Tag: M.W:200-300

651780-27-7 A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

651780-27-7, Toluene (40 mL) was added to a flask containing ethyl [6-BROM-1,] 2-benzisoxazole-3-carboxylate (3.15 g, 11.7 mmol), tetrakis (triphenylphosphine) palladium [(0)] (835 mg, 0.723 mmol, Strem), cesium carbonate (4.12 g, 12.6 mmol, Aldrich), and 2- (trifluoromethyl) phenylboronic acid (2. [38] g, 12.5 mmol, Aldrich) under argon. This mixture was heated in a 100 C oil bath for 35 hours. The mixture was diluted with EtOAc (250 mL) and washed with 4: 1 water: brine (250 [ML)] followed by brine (250 mL). The organics were filtered through a [1″PLUG] of silica gel and evaporated. Product was split in two, adsorbed onto silica gel, and purified on Biotage Flash 40 M+ silica cartridges using 20% EtOAc in heptane. Yield was 2.08 g of orange solid. [‘H] NMR (400 MHz, DMSO-d6) [5] ppm 1.42 (t, [J=7.] 15 Hz, 3 H) 4.51 (q, [J=7.] 05 Hz, 2 H) 7.52 (d, J=7. 46 Hz, [1] H) 7.51 (d, [J=8.] 09 Hz, 1 H) 7.71 (t, J=7. 57 Hz, [1] H) 7.79 (t, [J=7.] 36 Hz, 1 H) 7.91 (d, [J=7.] 67 Hz, [1] [H)] 7.93 (s, 1 H) 8.14 (d, J=8. 09 Hz, 1 H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

651780-27-7, Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,651780-27-7,its application will become more common.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37924-85-9

(b) Sodium hydride (50% in mineral oil, 3.4 g, 0.071 mole) is washed free of mineral oil with hexane (3*30 mL) and suspended in dimethylformamide (100 mL). This suspension is well stirred and maintained near room temperature (water bath) during the dropwise addition of a solution of imidazole (4.8 g, 0.071 mole) in dimethylformamide (25 mL). The reaction mixture is stirred at room temperature for 1 hour when 3-bromomethyl-1,2-benzisoxazole (15.0 g, 0.071 mole) is added all at once. The mixture is then heated at 85 C. for 8 hours. The solvent is evaporated in vacuo and the residue is taken up in methylene chloride (200 mL) and washed with water (3*50 mL). The organic solution is dried over anhydrous sodium sulfate, filtered and evaporated to give 3-[(1H-imidazol-1-yl)methyl]-1,2-benzisoxazole, which is purified by recrystallisation from isopropanol, m.p. 52-55 C.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,its application will become more common.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

651780-27-7, A solution of ethyl 6-brom-1, 2-benzisoxazole-3-carboxylate (Intermediate 55) (0.05g) and cyclopropylamine (0. 03ml) in methanol (lml) was stirred at reflux for 6h. The solvent was evaporated and the residue was triturated with ether to give the title compound as a white solid (0.04g).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2004/10995; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2 A common heterocyclic compound, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,its application will become more common.

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,its application will become more common.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 719-64-2

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,5-Chloro-3-phenylbenzo[c]isoxazole,719-64-2,its application will become more common.

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is 3-(Bromomethyl)benzo[d]isoxazole, and cas is 37924-85-9, its synthesis route is as follows.,37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

With the complex challenges of chemical substances, we look forward to future research findings about 37924-85-9,belong Benzisoxazole compound

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belong Benzisoxazole compound,3-(Bromomethyl)benzo[d]isoxazole,37924-85-9,Molecular formula: C8H6BrNO,mainly used in chemical industry, its synthesis route is as follows.,37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

With the synthetic route has been constantly updated, we look forward to future research findings about 3-(Bromomethyl)benzo[d]isoxazole,belong Benzisoxazole compound

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is 3-(Bromomethyl)benzo[d]isoxazole, and cas is 37924-85-9, its synthesis route is as follows.,37924-85-9

(b) A solution containing 1-dimethylcarbamoyl-4-(3-trimethylsilyloxypropyl)-imidazole (6.7 g, 0.025 mole), and 3-bromomethyl-1,2-benzisoxazole (5.3 g, 0.025 mole) in anhydrous acetonitrile (30 mL) is stirred at reflux for 72 hours. The reaction mixture is cooled and mixed with a solution of sodium methoxide (3 g, 0.055 mole) in methanol (30 mL). The resulting solution is stirred at reflux for 26 hours. The solvents are evaporated and the residue is taken up in 1N hydrochloric acid (30 mL). This solution is allowed to stand at ambient temperature for 3 hours and is then made basic (pH 9) by addition of 50% aqueous sodium hydroxide solution. The mixture is extracted with methylene chloride (2*25 mL) and the combined extracts are washed with water (2*20 mL), dried over anhydrous sodium sulfate, filtered, and the solvent is evaporated to give crude 3-[(5-(3-hydroxypropyl)-1H-imidazol-1-yl)methyl]-1,2-benzisoxazole which is purified by trituration with acetone (15 mL), m.p. 129-131 C.

With the complex challenges of chemical substances, we look forward to future research findings about 37924-85-9,belong Benzisoxazole compound

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics